fise-forest-information-system-for-europe
waldbestand
aufbewahrungs--und-archivierungsplanung-aap---bund
Schweiz
bois
geodati-di-base
fise-forest-information-system-for-europe
it
fr
WMTS-FSDI service, layer "Surface model NFI"
en
de
ch.bafu.landesforstinventar-vegetationshoehenmodell_relief
ch.bafu.landesforstinventar-vegetationshoehenmodell_relief
Service WMTS-IFDG, couche , Layer "Modèle de surface IFN"
WMTS-BGDI Dienst, Layer "Oberflächenmodell LFI"
ch.bafu.landesforstinventar-vegetationshoehenmodell_relief
Servizio WMTS-IFDG, strato "Modello della superficie terrestre IFN"
ch.bafu.landesforstinventar-vegetationshoehenmodell_relief
conservation-and-archiving-planning-aap---confederation
Le informazioni relative all'altezza della vegetazione vengono ottenute con metodi di teledetezione mediante sensori attivi e passivi. Un sensore attivo è il LiDAR. Un sensore passivo è un sensore ottico, come ad esempio un apparecchio fotografico per immagini aeree. L'acquisizione dei dati LiDAR in Svizzera ha luogo su scala regionale, cantonale e nazionale. Vengono effettuate regolarmente riprese fotografiche stereoscopiche a livello nazionale con cadenza triennale. In base a questi dati di base pianificarbili di swisstopo vengono quindi realizzati regolarmente set di dati in 3D - modelli digitali della superficie (MDS) - con una risoluzione elevata nell'ambito dell'Inventario Forestale Nazionale (IFN). In base alla differenza tra il MDS e il modello digitale del terreno di swisstopo (swissAlti3D) è possibile calcolare il modello digitale della superficie normalizzato (MDSn). Le costruzioni vengono eliminate utilizzando una combinazione delle superfici di base del modello topografico del paesaggio (TLM) e delle informazioni spettrali delle immagini aeree stereoscopiche. Il risultato finale è costituito da un modello di altezza della vegetazione (modello di altezza della vegetazione VHM) in Svizzera.
ressource-forestiere
geocat.ch permalink
Relief shading of vegetation height model NFI
ifdg-linfrastructure-federale-de-donnees-geographiques
fsdi-federal-spatial-data-infrastructure
Map (Preview) Previsione map.geo.admin.ch
Preview map.geo.admin.ch
Map (Preview) Aperçu map.geo.admin.ch
Aperçu map.geo.admin.ch
Map (Preview) map.geo.admin.ch
it
Map (Preview) Vorschau map.geo.admin.ch
Previsione map.geo.admin.ch
de
en
fr
Vorschau map.geo.admin.ch
Link per la descrizione dei dettagli
it
Link zur Detailbeschreibung der Daten (Metadaten)
Link to description
de
Lien vers la description détaillée des données
fr
en
geodonnees-de-base
fise-forest-information-system-for-europe
en
55eb4917-ce3b-423b-873f-2c8efb1c6762@bundesamt-fur-umwelt-bafu
2016-10-31T00:00:00
planification-de-la-conservation-et-de-larchivage-aap---confederation
Link zum Fachportal
bosco
wald@bafu.admin.ch
Abteilung Wald, Bundesamt für Umwelt
Les informations sur la hauteur de la végétation sont obtenues par des méthodes de télédétection utilisant des capteurs actifs et passifs. Le LiDAR est un exemple de capteur actif. Un capteur passif est un capteur optique, par exemple un appareil de prises de vues aériennes. L'acquisition de données LiDAR est réalisée en Suisse à l'échelle régionale, cantonale et nationale. Des photographies stéréoscopiques sont prises de l'ensemble du territoire national selon une périodicité de trois ans. Ces données de base programmées fournies par swisstopo servent à élaborer régulièrement des jeux de données 3D – des modèles numériques de surface (MNS) – à haute résolution dans le cadre de l'inventaire forestier national (IFN). La différence entre le MNS et le modèle numérique de terrain de swisstopo (swissAlti3D) permet de calculer un modèle numérique de surface normalisé (MNSn). Les constructions sont gommées en combinant les surfaces de base du modèle topographique du paysage (MTP) de swisstopo et les informations spectrales des images stéréoscopiques. Le résultat final est un modèle de la hauteur de la végétation (MHV) en Suisse.
fr
pianificazione-della-conservazione-e-dellarchiviazione-aap---confederazione
Ombreggiature del rilievo della vegetazione IFN
RESTful API von geo.admin.ch
RESTful API von geo.admin.ch
it
RESTful API from geo.admin.ch
RESTful API from geo.admin.ch
de
RESTful API da geo.admin.ch
RESTful API de geo.admin.ch
RESTful API da geo.admin.ch
RESTful API de geo.admin.ch
fr
en
2019-10-31T00:00:00
forest-resource
risorse-forestali
Reliefschattierung zum Vegetationshöhenmodell LFI
bgdi-bundesgeodaten-infrastruktur
ifdg-infrastruttura-federale-dei-dati-geografici
fise-forest-information-system-for-europe
Estompage du relief appliqué au modèle de la hauteur de la végétation de l'IFN
Informationen zu Vegetationshöhen werden mit Methoden der Fernerkundung mit aktiven und passiven Sensoren ermittelt. Ein aktiver Sensor ist LiDAR. Ein passiver Sensor ist ein optischer Sensor, zum Beispiel eine Luftbildkamera. LiDAR wird in der Schweiz auf regionaler, kantonaler und nationaler Ebene aufgenommen. Stereo – Lufbilder werden auf nationaler Ebene regelmässig in einem 3-Jahres Turnus aufgezeichnet. Aus diesen planbaren Grundlagendaten der swisstopo werden regelmässig 3D Datensätze, digitale Oberlächenmodelle (DOM), mit hoher Auflösung im Rahmen des Landesforstinventars (LFI) erstellt. Aus der Differenz des DOM und dem digitalen Terrainmodell der swisstopo (swissAlti3D) wird ein normalisiertes digitales Oberflächenmodell (nDOM) berechnet. Gebäude werden mit einer Kombination aus den Grundflächen des Topographischen Landschaftsmodells (TLM) der swisstopo und den spektralen Informationen der Stereo – Luftbilder eliminiert. Das Endresutat ist ein Modell der Vegetationshöhe (Vegetationshöhenmodell VHM) über die Schweiz.
geobasisdaten
it
wald
en
de
Oberflächenmodell LFI
ch.bafu.landesforstinventar-vegetationshoehenmodell_relief
it
fr
official-geodata
de
wood
Information on vegetation height is determined using remote sensing methods with active and passive sensors. LiDAR is an active sensor. An optical sensor, for example an aerial camera, is a passive sensor. LiDAR is incorporated in Switzerland on a regional, cantonal and national level. Stereo aerial photos are regularly recorded on a national level in a three year cycle. Regular 3D data sets and digital surface models (DSM) with a high resolution are created from this predictable core data from swisstopo within the framework of the National Forest Inventory (NFI). From the difference between the DSM and the digital terrain model by swisstopo (swissAlti3D), a normalised digital surface model (nDSM) is calculated. Buildings are eliminated using a combination of the ground areas of the swisstopo topographic landscape model (TLM) and spectral information from the stereo aerial photos. The end result is a model of vegetation height (vegetation height model VHM) in Switzerland.